How to use Bandai decals
In recent years, the number of model-making enthusiasts has been increasing, especially the fan base of Gunpla. Bandai, as the official manufacturer of Gunpla, has launched a variety of accessories and tools, among whichWater Slide DecalIt is one of the important tools for improving model details. This article will introduce in detail how to use Bandai decals, and attach hot topics and hot content in the past 10 days to help model enthusiasts better master this technique.
1. Basic introduction to Bandai decals
Bandai Water Sticker is a sticker activated by water. Compared with ordinary stickers, it can adhere to the surface of the model better, especially curved surfaces and complex structures. The decals have delicate patterns and high transparency, which can greatly improve the realism and detail of the model.
| Water sticker type | Features | Applicable model |
|---|---|---|
| Ordinary decals | Clear pattern and easy to operate | Most Gunpla |
| Metallic decals | With metallic luster, enhance texture | Limited edition or specially painted models |
| Fluorescent water sticker | Glows in the dark, unique effect | Glow-in-the-dark theme model |
2. How to use Bandai decals
Using Bandai decals requires certain skills and patience. Here are the detailed steps:
1. Preparation
Before starting, make sure the surface of the model is clean and dust-free. You can use a cotton swab or soft cloth to gently wipe the surface. Also have the following tools ready:
2. Cut out the decals
Use scissors or a pen knife to cut the required decals from the backing paper as close to the edge of the pattern as possible to reduce the excess.
3. Soak the patch in water
Soak the cut decal in warm water for 10-20 seconds until the decal can slide on the backing paper.
4. Transfer decals
Use tweezers to gently hold the decal and slide it from the backing paper to the surface of the model. You can use a cotton swab to adjust the position to ensure a good fit.
5. Fixed decals
Use a cotton swab to gently press the water patch to squeeze out excess water and air bubbles. If necessary, you can use decal softener to help the decal adhere better to complex curved surfaces.
6. Drying
Wait for the decal to dry completely (usually 1-2 hours), then you can spray protective paint for added durability.
3. Hot topics and content in the past 10 days
The following are the hot topics and content that have been discussed frequently in the model enthusiast community in the past 10 days:
| hot topics | Discussion popularity | Main content |
|---|---|---|
| Bandai releases new water stickers | high | Bandai announces new series of decals for latest Gundam models |
| Water sticker softener review | in | Netizens share their experience and effect comparison of various water softeners |
| Model protective paint selection | high | Discuss how to choose a protective paint suitable for water decals to avoid dissolution or discoloration |
| Solutions to common problems with water stickers | in | A summary of common problems (such as bubbles and breaks) in the use of decals and their solutions |
4. Frequently Asked Questions and Solutions
You may encounter some problems when using Bandai decals. The following are common problems and solutions:
| question | Reason | solution |
|---|---|---|
| Water sticker breaks | Soaking time is too long or improper operation | Control soaking time and operate gently |
| Air bubbles remain | The water is not completely squeezed out | Use a cotton swab to press from the center outwards |
| Water sticker peels off | The surface is not clean or dry thoroughly | Clean surfaces and apply protective paint |
5. Summary
Bandai decals are an important tool for improving details in model making. Mastering the correct use method can greatly improve the effect of the model. Through the introduction of this article, I hope that model enthusiasts can better use decals and refer to recent hot topics and hot content to further improve their production skills.
check the details
check the details
en
