How to bleed air from brakes
In car repair and maintenance, brake system maintenance is particularly important. If there is air in the brake system, the brake pedal will be soft and the braking effect will be reduced. In severe cases, it may even affect driving safety. Therefore, regularly bleeding air is one of the key steps in brake system maintenance. This article will introduce in detail the methods, steps and precautions for bleeding brake air, and provide relevant data on hot topics in the past 10 days for reference.
1. The necessity of exhausting air from the brake system
The hydraulic oil in the brake system may be mixed with air after long-term use, resulting in a longer brake pedal stroke or insufficient braking force. The purpose of bleeding air is to ensure that there is no air remaining in the brake system and to ensure the braking effect.
2. Steps to bleed air from the brakes
1. Preparation: Make sure the vehicle is parked on a flat surface and have appropriate tools ready (such as air bleed screw wrench, transparent hose, brake fluid container, etc.).
2. Check the brake fluid level: Open the brake fluid bottle cap and check whether the fluid level is within the normal range. If the fluid level is too low, brake fluid needs to be replenished first.
3. Air bleeding sequence: usually start from the wheel farthest from the brake master cylinder (such as right rear wheel, left rear wheel, right front wheel, left front wheel).
4. Operation steps:
| steps | Operation content |
|---|---|
| 1 | Attach the clear hose to the air bleed screw and place the other end into the container. |
| 2 | Have your assistant depress the brake pedal and maintain pressure. |
| 3 | Loosen the air bleed screw and observe whether there are bubbles in the brake fluid flowing out. |
| 4 | After tightening the screw, release the brake pedal. |
| 5 | Repeat the above steps until there are no bubbles in the brake fluid flowing out. |
3. Precautions
1. During the air bleeding process, the brake fluid level must be constantly checked to prevent air from re-entering the system.
2. Use the type of brake fluid that meets the requirements of the vehicle. Different types cannot be mixed.
3. After the operation is completed, the brake pedal hardness needs to be tested to ensure that the braking effect returns to normal.
4. Data reference for hot topics in the past 10 days
The following is data on recent hot topics related to car maintenance:
| Ranking | topic | Search volume (10,000) |
|---|---|---|
| 1 | New energy vehicle maintenance skills | 45.6 |
| 2 | Common faults of brake system | 38.2 |
| 3 | DIY Car Repair Tutorial | 32.7 |
| 4 | Brake oil replacement cycle | 28.9 |
| 5 | Winter Car Care Guide | 25.4 |
5. Summary
Brake bleeding is an important step to ensure the brake system is working properly. Through standardized operating procedures and precautions, air can be effectively eliminated and braking performance improved. At the same time, paying attention to popular car maintenance topics will help you learn more practical maintenance skills.
check the details
check the details
en
